孔庆平,尹冰.常温KY型发黑液的研制与性能研究[J].表面技术,2007,36(6):85-86,92.
KONG Qing-ping,YIN Bing.Preparation and Performance Research on KY Type Blackening Solution of Brass at Room Temperature[J].Surface Technology,2007,36(6):85-86,92
常温KY型发黑液的研制与性能研究
Preparation and Performance Research on KY Type Blackening Solution of Brass at Room Temperature
投稿时间:2007-08-19  修订日期:2007-12-10
DOI:
中文关键词:  黄铜  常温  氧化发黑  发黑液
英文关键词:Brass  Room temperature  Oxidative blackening  Blackening solution
基金项目:
作者单位
孔庆平 义乌市森美电镀厂,浙江义乌322002 
尹冰 西南科技大学应用化学研究所,四川绵阳621010 
AuthorInstitution
KONG Qing-ping Senmei Plating Plant in Yiwu, Yiwu 322002, China 
YIN Bing Institute of Applied Chemistry,Southwest University of Science and Technology, Mianyang 621010, China 
摘要点击次数:
全文下载次数:
中文摘要:
      为了在黄铜基材上常温获得黑色膜层,研究了黄铜酸性氧化发黑工艺,着重对硒一铜一磷系发黑液进行研究。主要讨论了黄铜氧化发黑的前处理、溶液组分和着色时间等因素对着色膜层质量的影响。研究结果表明:溶液组分是影响着色膜颜色的主要因素,使用时要注意控制其含量;适量的添加剂可以提高着色膜质量。最终研制出一种常温KY型发黑液,与传统配方相比,该发黑剂具有发黑时间短、发黑膜耐磨且黑色纯正、光亮性好、生产成本低等优点,具有广阔的推广和应用前景。
英文摘要:
      In order to obtain black films on brass at room temperature , the oxidative blackening process on brass in acid solution was studied. Emphasizing the study of blackening solution of Se-Cu-P system. Effect of pretreatment procedure, different solution components and coloring time and so on on quality of coloring film on brass were discussed. The results show that the solution component is the primary factor that affected the quality of coloring film, which should be carefully controlled. And the quality of coloring film can be improved by adding appropriate additives. Ultimately, a KY type brass blackening solution is prepared, compared with conventional formulations, the solution possesses more advantages, such as less blackening time, better wear resistance of the blackening film, pure andshiny black color,lower production cost, etc. It has a bright future in popularization and application.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20108467位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号