付平,刘艳琳.涂料黏度(涂一4)测量结果的不确定度评定[J].表面技术,2007,36(4):89-90.
FU Ping,LIU Yan-Iin.Uncertainty Evaluation of Measurement Results of Coating Viscosity[J].Surface Technology,2007,36(4):89-90
涂料黏度(涂一4)测量结果的不确定度评定
Uncertainty Evaluation of Measurement Results of Coating Viscosity
投稿时间:2007-04-16  修订日期:2007-08-10
DOI:
中文关键词:  涂料  黏度  测量结果  不确定度
英文关键词:Coating  Viscosity  Measurement results  Uncertainty
基金项目:
作者单位
付平 中国兵器工业第59研究所,重庆400039 
刘艳琳 中国兵器工业第59研究所,重庆400039 
AuthorInstitution
FU Ping No. 59 Institute of China Ordnance Industry, Chongqing 400039, China 
LIU Yan-Iin No. 59 Institute of China Ordnance Industry, Chongqing 400039, China 
摘要点击次数:
全文下载次数:
中文摘要:
      为了评定涂4黏度测定结果的分散性,根据JJF 1059-1999《测量不确定度评定与表示》的规定和检测工作经验,通过对检测过程的分析,提出了用涂.4黏度计法进行涂料黏度测量时影响测量结果不确定度的主要因素有:反复测量随机因素产生的不确定度;温度计的示值误差产生的不确定度:秒表的示值误差产生的不确定度;黏度计尺寸偏差产生的不确定度。使用不确定度的A类评定方法和B类评定方法,得出涂_4黏度测量结果的合成、扩展不确定度。
英文摘要:
      The decentralization of the measurement results of coating viscosity was evaluated. According to the provision in JJF1059-1999 evaluation and expression of uncertainty and experience, through analysis of measurement process, it was put forward that the main factors influencing the uncertainty of measurement results were temperature display error, time display error, dimension error of viscosity, and error caused by random factors. The synthetic and expending uncertainty of viscosity measurement results were evaluated by class A and class B methods.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19965775位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号