石磊,石勇,董新民.铝及铝合金电镀[J].表面技术,2007,36(4):87-88.
SHI Lei,SHI Yong,DONG Xin_min.The Electroplating of Aluminium and Aluminium Alloy[J].Surface Technology,2007,36(4):87-88
铝及铝合金电镀
The Electroplating of Aluminium and Aluminium Alloy
投稿时间:2007-03-17  修订日期:2007-08-10
DOI:
中文关键词:    铝合金  电镀
英文关键词:Aluminium  Aluminium alloy  Electroplating
基金项目:
作者单位
石磊 山东建筑大学材料科学与工程学院,山东济南250014 
石勇 济南浩金表面技术有限责任公司,山东济南250014 
董新民 山东建筑大学设备处,山东济南250014 
AuthorInstitution
SHI Lei School of Materials Science and Engineering, Shandong Jianzhu University, Jinnan 250014, China 
SHI Yong Jinan Haojin Surface Technology Limited Corporation, Jinan 250014, China 
DONG Xin_min Department of Experiment and Equipment, Shandong Jianzhu University, Jinnan 250014, China 
摘要点击次数:
全文下载次数:
中文摘要:
      铝及其合金是应用最广泛的五大基体之一。它具有良好的导电性、传热快、密度小、强度高、易成型等优点,随着现代工业的发展,广泛应用于交通工业、航空工业、建筑装潢、日常生活。但铝和铝合金硬度低、不耐磨、易发生晶间腐蚀,这些缺点影响了其应用范围和使用寿命。经过电镀后,可扬长避短增加防护·装饰性作用,延长其寿命,扩大应用范围。
英文摘要:
      Aluminium and aluminium alloy are one of the most widely applied five substrates. With the development of modern industry, it is widely applied in traffic industry, aircraft industry, architecture and upholster and daily life. While its disadvantages of low hardness, low wear resistance and easy to occur inter crystal corrosion affect its application ranges and life-span. Therefore the electroplated aluminium and aluminium alloy can maximize the favourable factors and minimize unfavourable ones and increase to protect-ornament function use, lengthen its life-span, expand the range of application.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19515441位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号