姜伟,胡芳友,黄旭仁.工艺参数对激光熔覆层微观形貌的影响[J].表面技术,2007,36(4):57-58,75.
JIANG Wei,HU Fang-you,HUANG Xu-ren.The Influence of Craft Parameter on the Microstructure by C02 Laser Cladding[J].Surface Technology,2007,36(4):57-58,75
工艺参数对激光熔覆层微观形貌的影响
The Influence of Craft Parameter on the Microstructure by C02 Laser Cladding
投稿时间:2007-05-11  修订日期:2007-08-10
DOI:
中文关键词:  激光熔覆  镍基高温合金  工艺参数  微观形貌
英文关键词:Laser cladding  Ni-based high-temperature alloy  Craft parameter  Microstructure
基金项目:
作者单位
姜伟 海军航空工程学院青岛分院,山东青岛266041 
胡芳友 海军航空工程学院青岛分院,山东青岛266041 
黄旭仁 海军航空工程学院青岛分院,山东青岛266041 
AuthorInstitution
JIANG Wei Qingdao Branch, Naval Aeronautical Engineering Academy, Qingda0 266041 , China 
HU Fang-you Qingdao Branch, Naval Aeronautical Engineering Academy, Qingda0 266041 , China 
HUANG Xu-ren Qingdao Branch, Naval Aeronautical Engineering Academy, Qingda0 266041 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      为了研究工艺参数对激光熔覆层微观形貌的影响,以C0:连续激光器为热源,在镍基高温合金基体表面熔覆自配粉末,对不同工艺参数下熔覆层的微观形貌进行了分析。结果表明:在一定范围内,其它工艺参数不变,增加功率,增大扫描速度,晶粒更趋致密细小;工艺参数影响冶金结合带的优劣、胞状晶区的厚薄以及夹杂物的有无和分布。
英文摘要:
      Regard the Ni-based high-temperature alloy as substrate and the mixed powder by oneself as layer cladding, the microstructure of laser cladding layers under different craft parameters was studied by CW C02 laser. The results show that a certain extent, the other parameters constant, increasing power, increasing scanning speed, small grains become more dense; The good and bad of metallurgical belt, the cellular crystal thickness and the availability and distribution of inclusions are affected by the parameters.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19515540位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号