陈首部,孙奉娄,周武庆.交流脉冲等离子体作用于聚四氟乙烯表面性能研究[J].表面技术,2007,36(4):52-53,86.
CHEN Shou-bu,SUN Feng-Iou,ZHOU Wu-qing.Study on AC Pulse Plasma Modification for PTFE Surface[J].Surface Technology,2007,36(4):52-53,86
交流脉冲等离子体作用于聚四氟乙烯表面性能研究
Study on AC Pulse Plasma Modification for PTFE Surface
投稿时间:2007-02-28  修订日期:2007-08-10
DOI:
中文关键词:  交流脉冲等离子体  聚四氟乙烯  表面改性  亲水性
英文关键词:AC pulse plasma  PTFE  Surface modification  Hydrophilicity
基金项目:国家民委科研基金资助项目(05ZN03)
作者单位
陈首部 中南民族大学等离子体研究所,湖北武汉430074 
孙奉娄 中南民族大学等离子体研究所,湖北武汉430074 
周武庆 中南民族大学等离子体研究所,湖北武汉430074 
AuthorInstitution
CHEN Shou-bu Plasma Research Institute, SCUFN, Wuhan 430074, China 
SUN Feng-Iou Plasma Research Institute, SCUFN, Wuhan 430074, China 
ZHOU Wu-qing Plasma Research Institute, SCUFN, Wuhan 430074, China 
摘要点击次数:
全文下载次数:
中文摘要:
      利用自行研制的lOOkHz交流脉冲电源产生等离子体,对聚四氟乙烯进行了表面改性研究。在放电电压、占空比、工作气压、工作气氛、处理时间相同的情况下,探讨了样品置于放电区域不同位置、采用不同的电极间距对改性结果的影响,并对改性效果的保持特性进行了考察。通过接触角测量、扫描电镜( SEM)等手段对作用前后样品的亲水性、表面形貌进行了检测和分析。结果表明:交流脉冲等离子体对PTFE表面有良好的改性效果。
英文摘要:
      PTFE surface modification employing a lOOkHz AC pulse plasma generator was researched. In the same condition of voltage, duty ratio, pressure, gas, time, the effect of sample position and distance between poles on modification were investigated. The retentivity of modification effect was tested. The hydrophilicity and surface morphology were discussed using the contact angle and SEM analysis. Measurement results show that the AC pulse plasma modified efficacy for PTFE surface will improve greatly.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20032791位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号