吴超云,张津.阴极电泳漆膜常见缺陷产生的原因与解决方法[J].表面技术,2007,36(2):80-83.
WU Chao-yun,ZHANG Jin.Factor of Causing Cathodic-electrophoresis Coatings Defect and Its Process Method[J].Surface Technology,2007,36(2):80-83
阴极电泳漆膜常见缺陷产生的原因与解决方法
Factor of Causing Cathodic-electrophoresis Coatings Defect and Its Process Method
投稿时间:2007-02-07  修订日期:2007-04-10
DOI:
中文关键词:  阴极电泳  漆膜  缺陷
英文关键词:Cathodic-electrophoresis  E-coating  Defect
基金项目:
作者单位
吴超云 重庆工学院材料学院,重庆400044 
张津 重庆工学院材料学院,重庆400044 
AuthorInstitution
WU Chao-yun Materials College of Chongqing Institute of Technology , Chongqing 400044 , China 
ZHANG Jin Materials College of Chongqing Institute of Technology , Chongqing 400044 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      介绍了阴极电泳涂装中常出现的缺陷类型,主要有粗糙、针孔、缩孔、杂质和气泡等。分别分析了其出现的原因,提出了相应的解决方法。为开展阴极电泳研究及解决实际生产中出现的缺陷问题提供了参考。
英文摘要:
      Defect types existed in cathodic-electrophoresis coatings have been summarized. They contain mainly roughness, pinholes, craterring, impurity and bubbling etc. The factor resulted in defection is analyzed and the way of protection is shown. It offers suggestion for the research and the practical industry production of cathodic-electrophoresis processing.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19515246位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号