龚正朋,游敏,张露露,吴建好,魏晓红.镀银鳞片石墨的制备研究[J].表面技术,2007,36(2):73-75.
GONG Zheng-peng,YOU Min,ZHANG Lu-Iu,WU Jian_hao,WEI Xiao-hong.Study on the Preparation of Ag-coated Flake Graphite[J].Surface Technology,2007,36(2):73-75
镀银鳞片石墨的制备研究
Study on the Preparation of Ag-coated Flake Graphite
投稿时间:2006-11-15  修订日期:2007-04-10
DOI:
中文关键词:  化学镀银  鳞片石墨  导电率  填料
英文关键词:Electroless silver plating  Flake graphite  Conductivity  Filler
基金项目:湖北省教育厅科研计划重大项目(20032001)
作者单位
龚正朋 三峡大学机械与材料学院,湖北宜昌443002 
游敏 三峡大学机械与材料学院,湖北宜昌443002 
张露露 三峡大学机械与材料学院,湖北宜昌443002 
吴建好 中南大学物理科学与技术学院,湖南长沙410083 
魏晓红 三峡大学机械与材料学院,湖北宜昌443002 
AuthorInstitution
GONG Zheng-peng College of Mechanical and Materials Engineering, China Three Gorges University, Yichang 443002, China 
YOU Min College of Mechanical and Materials Engineering, China Three Gorges University, Yichang 443002, China 
ZHANG Lu-Iu College of Mechanical and Materials Engineering, China Three Gorges University, Yichang 443002, China 
WU Jian_hao School of Physics Science and Technology, Central South University, Changsha 410083, China 
WEI Xiao-hong College of Mechanical and Materials Engineering, China Three Gorges University, Yichang 443002, China 
摘要点击次数:
全文下载次数:
中文摘要:
      为制备可用于高性能电池电极和导电胶的石墨填料,采用了不经过敏化、活化处理而直接在碱性镀液中进行化学镀银的方法制备了镀银鳞片石墨。研究了石墨镀前预处理、镀液温度和主盐添加量等因素对镀银石墨电阻率和电导率的影响。结果表明:在研究所采取的试验条件下,工艺参数取镀液温度600C、主盐添加量为石墨的15%时,经过化学镀银处理后电导率提高了大约4. 16倍。观察镀银石墨的扫描电镜(SEM)形貌发现,所采取的化学镀工艺可制得符合要求的镀银鳞片石墨。
英文摘要:
      In order to prepare Ag-coated flake graphite used as filler of conductive adhesive or poles of the battery, the electroless plating procedure was investigated that plated the silver directly in alkaline solution without activation or sensitize treatment. The effects of some process parameters such as pre-treatment, before electroless plating, the temperature of the solution and the addition of the solvent were studied. The results from experiment show that the conductivity of the Ag-coated flake graphite is increased by 416 0-10 against that from un-coated graphite under the condition of the ratio of solvent over graphite taken as 150-/o and plating at 600C . And it is also supported with the analysis of the images from scanning electron microscopy ( SEM) .
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20116298位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号