刘慧平,阮锋,罗建东.化学镀镍在拉深模中的应用[J].表面技术,2007,36(2):67-67,75.
LIU Hui-ping,RUAN Feng,LUO Jian-dong.Application of Chemical Ni Plating in Drawing Die[J].Surface Technology,2007,36(2):67-67,75 |
| 化学镀镍在拉深模中的应用 |
| Application of Chemical Ni Plating in Drawing Die |
| 投稿时间：2006-11-08 修订日期：2007-04-10 |
| DOI： |
| 中文关键词: 表面强化 化学镀 拉深模 |
| 英文关键词:Surface strengthening Chemical plating Drawing die |
| 基金项目:广东省工业攻关计划资助项目(2004A11403002) |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为了提高拉伸模的使用寿命，增强其抗疲劳性能，采用了化学镀Ni-P之后加以适当的中温处理的方法。结果表明：经处理的拉伸模镀层均匀，硬度显著提高，寿命能提高2-3倍，且模具无变形。因此，该方法是拉伸模理想的表面强化方法，具有极好的实用和推广价值。 |
| 英文摘要: |
| In order to improve the life of the drawing die, increase its resist capability of distress, the chemical plating of Ni-P and middle temperature heat treatment were adopted. The result shows that the coating is uniform, and the rigidity can markedly improve, the life can improve two or three times, and the die cant distortion, so it is an ideal way for surface strengthening of drawing die and fit for spreading. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号