韩翠红,钱翰城,李俊,王书洪.用高频感应氮化技术在Ti6Al4V合金表面制备氮化膜的工艺探讨[J].表面技术,2007,36(2):25-28.
HAN Cui-hong,QIAN Han-cheng,LI Jun,WANG Shu-hong.Research on Preparing Technology of Hard Nitrid Layer by High-frequency Induction Nitriding Process on Ti6A14V Alloy[J].Surface Technology,2007,36(2):25-28 |
| 用高频感应氮化技术在Ti6Al4V合金表面制备氮化膜的工艺探讨 |
| Research on Preparing Technology of Hard Nitrid Layer by High-frequency Induction Nitriding Process on Ti6A14V Alloy |
| 投稿时间：2006-11-29 修订日期：2007-04-10 |
| DOI： |
| 中文关键词: Ti6A14V合金 高频感应氮化 氮化膜 |
| 英文关键词:Ti6A14V titanium alloy High-frequency induction nitrding Nitrid layer |
| 基金项目: |
|
|
| Author | Institution |
| HAN Cui-hong | Chongqing University, College of Mechanical Engineering, Chongqing 400030 , China |
| QIAN Han-cheng | Chongqing University, College of Mechanical Engineering, Chongqing 400030 , China |
| LI Jun | Chongqing University, College of Mechanical Engineering, Chongqing 400030 , China |
| WANG Shu-hong | Chongqing University, College of Mechanical Engineering, Chongqing 400030 , China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 对用高频感应氮化技术在Ti6Al4V合金表面生成氮化膜的工艺进行了研究，测试并分析了不同处理温度和氮化时间对氮化膜生长速度、显微硬度的影响。研究证实：在860 - 11600C的温度范围内，膜层的厚度和显微硬度均随着处理温度的升高和氮化时间的延长而增加。XRD分析证实膜层结构主要由TiN和TiiN组成。 |
| 英文摘要: |
| The preparation of nitrid layer on the surface of Ti6Al4V titanium alloy by high-frequency induction nitriding in nitrogen medium has been studied. The different treating temperatures and different treating time on thickness and microhardness of layers the were tested and analyzed. The observation of samples treated at the range of 860 - 10600C reveales that the thickness and microhardness of layers increase with the increasing of treating time and treating temperature. By XRD analysis the layer is maily composed of TiN and Ti2N. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号