肖明颖,王引真,秦清彬,范振红.单枪共喷异种粒子涂层结构及结合强度分析[J].表面技术,2007,36(2):9-11.
XIAO Ming-ying,WANG Yin-zhen,QIN Qing-bin,FAN Zhen-hong.The Analysis of the Microstructure and Bond Strength of the Coatings Sprayed using Heterogeneity Particles at the Same time[J].Surface Technology,2007,36(2):9-11
单枪共喷异种粒子涂层结构及结合强度分析
The Analysis of the Microstructure and Bond Strength of the Coatings Sprayed using Heterogeneity Particles at the Same time
投稿时间:2006-11-08  修订日期:2007-04-10
DOI:
中文关键词:  复合涂层  单枪共喷  超音速火焰喷涂  涂层结构  结合强度
英文关键词:Compound coatings  Spraying at the same time  HVOF  Coating structure  Bond strength
基金项目:东营市科学基金资助项目(2005126)
作者单位
肖明颖 中国石油大学(华东),山东东营257061 
王引真 中国石油大学(华东),山东东营257061 
秦清彬 中国石油大学(华东),山东东营257061 
范振红 中国石油大学(华东),山东东营257061 
AuthorInstitution
XIAO Ming-ying China University of Petroleum, Dongying 257061 , China 
WANG Yin-zhen China University of Petroleum, Dongying 257061 , China 
QIN Qing-bin China University of Petroleum, Dongying 257061 , China 
FAN Zhen-hong China University of Petroleum, Dongying 257061 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      选用Cr3C,-NiCr粉末、Ni包MoS7粉、Ni60粉末以及3种粉末的混合粉末,采用超音速火焰喷涂技术制备涂层试样。研究了异种粒子共喷对涂层的显微组织结构特征和涂层的结合强度的影响。研究结果表明:与喷涂单一粒子相比,单枪共喷异种粒子在堆叠过程中更容易形成孔隙,造成涂层组织疏松;与单一粒子涂层相比,单枪共喷异种粒子涂层的结合强度明显下降;异种粒子共喷涂层的结合强度与异种粒子的配比相关。
英文摘要:
      Choosing Cr3C2-NiCr powder, Ni-coated MoS2 powder, Ni60 powder and the mixture of the three, and using HVOF technology to prepare the coating sample. The microstructure and bond strength of the coatings were studied. The results indicate that compared with spraying single particle, spraying heterogeneity particles at the same time is easier to form holes which made the microstructure of coatings loosen and the bond strength of the coatings decline; the bond strength of the coatings which were sprayed using heterogeneity particles at the same time have some thing to do with the proportion of the heterogeneity particles.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19941366位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号