刘文君,张英杰,章江洪,苏玉华.工艺因素对硅酸盐无铬钝化中耐蚀性的影响[J].表面技术,2007,36(1):60-61,96.
LIU Wen-jun,ZHANG Ying-jie,ZHANG Jiang-hong,SU Yu-hua.The Influence of Various Parameters on the Corrosion Resistance in Silicate non-chrome Passivation[J].Surface Technology,2007,36(1):60-61,96
工艺因素对硅酸盐无铬钝化中耐蚀性的影响
The Influence of Various Parameters on the Corrosion Resistance in Silicate non-chrome Passivation
投稿时间:2006-07-11  修订日期:2007-02-10
DOI:
中文关键词:  无铬钝化 硅酸盐 镀锌 耐蚀性
英文关键词:Non-chrome passivation  Silicate  Zinc plating  Corrosion resistance
基金项目:
作者单位
刘文君 昆明理工大学材料与冶金工程学院,云南 昆明 650093 
张英杰 昆明理工大学材料与冶金工程学院,云南 昆明 650093 
章江洪 昆明理工大学材料与冶金工程学院,云南 昆明 650093 
苏玉华 昆明理工大学材料与冶金工程学院,云南 昆明 650093 
AuthorInstitution
LIU Wen-jun Faculty of Materials and Metallurgical Engineering, Kungming University of Science and Technology, Kunming 650093, China 
ZHANG Ying-jie Faculty of Materials and Metallurgical Engineering, Kungming University of Science and Technology, Kunming 650093, China 
ZHANG Jiang-hong Faculty of Materials and Metallurgical Engineering, Kungming University of Science and Technology, Kunming 650093, China 
SU Yu-hua Faculty of Materials and Metallurgical Engineering, Kungming University of Science and Technology, Kunming 650093, China 
摘要点击次数:
全文下载次数:
中文摘要:
      为了更深入地探讨硅酸盐无铬钝化中工艺因素对耐蚀性的影响,本文采用中性盐雾试验考察了各种工艺条件下硅酸盐钝化膜的耐蚀性,结果表明,工艺因素对钝化膜耐蚀性影响很大,而且得出了各工艺参数与钝化膜耐蚀性之间的关系。
英文摘要:
      To order to study the influence of various parameters on the corrosion resistance in silicate non-chrome passivation deeply, the corrosion resistance of silicate was test by NSS in the various technics. The results show that the factor of technics have much effect on the corrosion resistance of passivating film, and the influence of various parameters on the corrosion resistance of passivating film is found.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19952991位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号