王青锋,刘祥萱,王煊军.导电性超细铜粉制备方法研究[J].表面技术,2007,36(1):45-47.
WANG Qing-feng,LIU Xiang-xuan,WANG Xuan-jun.Study on Preparation Technique of Conductive Ultrafine Copper Powder[J].Surface Technology,2007,36(1):45-47
导电性超细铜粉制备方法研究
Study on Preparation Technique of Conductive Ultrafine Copper Powder
投稿时间:2006-11-07  修订日期:2007-02-10
DOI:
中文关键词:  超细铜粉 防氧化 导电性
英文关键词:Ultrafine copper powder  Oxidation resistance  Conductivity
基金项目:
作者单位
王青锋 第二炮兵工程学院,西安 710025 
刘祥萱 第二炮兵工程学院,西安 710025 
王煊军 第二炮兵工程学院,西安 710025 
AuthorInstitution
WANG Qing-feng The Second Artillery Engineering College, Xi’an 710025, China 
LIU Xiang-xuan The Second Artillery Engineering College, Xi’an 710025, China 
WANG Xuan-jun The Second Artillery Engineering College, Xi’an 710025, China 
摘要点击次数:
全文下载次数:
中文摘要:
      利用自制防氧化剂对已氧化超细铜粉表面改性,研究了氧化层去除工艺,分析了防氧化剂浓度和制备温度对处理结果的影响,确定最佳工艺是以5%稀硫酸作为酸洗剂,防氧化剂浓度为1%,反应温度为60℃。实验发现铜粉红外反射谱图中有防氧化剂特征峰,推测防氧化剂通过化学键和作用在铜粉表面生成一层厚度适中的保护膜,抑制铜粉氧化,但并不影响导电性。
英文摘要:
      The oxidized copper powder is packed by homemade anti-oxidant. The technique for removing the oxides is studied, the influences of anti-oxidant’s concentration and reactive temperature are discussed, the outcomes show that the acid is 5%H2SO4, the concentration of anti-oxidant is 1%, the temperature is 60℃.The result analyzed by FTIR indicates that there are characteristic peaks of anti-oxidant in the powder’s IR spectrum. It presumes that the surface is packed by anti-oxidant, which forms protective film on the powder’s surface, prevents the surface from environment, but it doesn’t affect the conductivity.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第19991833位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号