闫志琴,刘燕萍.不锈钢离子渗碳耐磨性的研究[J].表面技术,2007,36(1):31-32.
YAN Zhi-qin,LIU Yan-ping.Research on the Wear Resistance of Stainless Steel by Plasma Carburization Process[J].Surface Technology,2007,36(1):31-32 |
| 不锈钢离子渗碳耐磨性的研究 |
| Research on the Wear Resistance of Stainless Steel by Plasma Carburization Process |
| 投稿时间：2006-07-11 修订日期：2007-02-10 |
| DOI： |
| 中文关键词: 不锈钢、等离子渗碳、耐磨性 |
| 英文关键词:Stainless steel Plasma carburization Wear resistance |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 为进一步提高不锈钢的耐磨性以更好地适应既需耐蚀，又需耐磨的现代工业中。本试验用离子渗碳的方法对其进行了改性，处理后获得了无共晶莱氏体组织的均匀细小的碳化物，从而改善了其组织，提高了其性能。与滚轮淬火钢相比其耐磨性提高了8倍。 |
| 英文摘要: |
| In order to enhance the wear resistance of stainless steel and make it being fit for the modern industry which needs both corroding and wear resistance, we have dealt it using plasma carburization technology in this test. After treatment, uniform and fine carbonization of no ledeburite organization were obtained. Therefore, we refined the organization of stainless steel and improved its property. Comparatively, the wear resistance of plasma carburization-treated steel has been enhanced approximately 8 times than that of the rolling quenching-dealt steel. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501715号